Difference between revisions of "OpenNI2"

From Wiki for iCub and Friends
Jump to: navigation, search
m
m (Output and data format)
Line 109: Line 109:
 
= Output and data format =
 
= Output and data format =
  
The driver opens three ports:
+
The driver opens these ports:
imageFrame:o
+
* [portPrefix]/userSkeleton:o - userSkeleton detection port (only opened if user detection is on)
depthFrame:o
+
* [portPrefix]/depthFrame:o - depth frame port
userTracker:o
+
* [portPrefix]/imageFrame:o - rgb camera frame port
  
 
imageFrame and depthFrame stream YARP images, and if connected to a yarpview, the video is available.
 
imageFrame and depthFrame stream YARP images, and if connected to a yarpview, the video is available.

Revision as of 20:13, 15 November 2013

The OpenNI2 device driver for YARP works with PrimeSense compatible RGB-D sensors, including Asus Xtion Pro. Tested on Debian Jessie (testing), Ubuntu 12.04+ and Mac OS X 10.8.4+.

Debian Wheezy (stable) is not supported by OpenNI2, due to glibc version being < 2.14.

Note: Microsoft Kinect sensors are not supported by this driver. However, they are supported by the old Kinect YARP driver, which was based on OpenNI version 1.

Installation

Dependencies

For Debian and Ubuntu, install the following dependencies:

sudo apt-get install g++ python libusb-1.0-0-dev libudev-dev freeglut3-dev doxygen graphviz

Also, you must have installed a Java SDK.

Next, install OpenNI2 and NiTE2 according to the latest official instructions at http://www.openni.org

Environment variables

Source the environment files (obtained from the previous step) by copying their content permanently into your .bashrc. From your OpenNI2 directory:

cat OpenNIDevEnvironment >> ~/.bashrc

And from your NiTE2 directory:

cat NiTEDevEnvironment >> ~/.bashrc

Source the variables to make the change effective (or logout and login again):

source ~/.bashrc

At the end of this process, you should have four new environment variables defined in your system:

OPENNI2_INCLUDE
OPENNI2_REDIST 
NITE2_INCLUDE 
NITE2_REDIST64 or NITE2_REDIST

Enabling OpenNI2 YARP driver

In the CMake configuration for YARP, set the following:

CREATE_DEVICE_LIBRARY_MODULES ON
ENABLE_yarpmod_OpenNI2DeviceServer ON
ENABLE_yarpmod_OpenNI2DeviceClient ON

We recommend that you also turn on RPATH (not strictly necessary, but useful to avoid cumbersome file copying of driver files - see next section). In CMake, press t to toggle advanced options, then set:

INSTALL_WITH_RPATH ON

If your environment variables were defined correctly, the following settings will be automatically taken care of by CMake:

NITE2_INCLUDE_LOCAL: full path to NiTE-2.x.x/Include directory
NITE2_LIBRARY: full path to libNiTE2.so
OPENNI2_INCLUDE_LOCAL: full path to OpenNI-2.1.0-x64/Include directory
OPENNI2_LIBRARY: full path to libOpenNI2.so

Finalizing the installation

These final steps are necessary to not incur in runtime errors like Couldn't create user tracker. If you use RPATH (recommended option), you need to copy and configure one file. If you do not use RPATH, you need to copy two directories. Details follow.

If you have set RPATH in the previous step

In this case, the OpenNI2 YARP driver must always be called from a directory that contains a copy (or symbolic link) of the NiTE.ini file from the stock NiTE2 distribution, properly configured. To prepare such a setup, do something along these lines:

mkdir ~/yarp_openni2_root
cd ~/yarp_openni2_root
cp $NITE2_REDIST64/NiTE.ini .
// or if you have the 32-bit version:
// cp $NITE2_REDIST/NiTE.ini .

Edit NiTE.ini, setting DataDir to be the full path to $NITE2_REDIST64/NiTE2 (or $NITE2_REDIST/NiTE2).

Now you're ready to call the yarpdev command from the yarp_openni2_root directory.

If you have not set RPATH in the previous step

In this case, the OpenNI2 YARP driver must always be called from a directory that contains a copy (or symbolic link) of the stock OpenNI2 and NiTE2 'Drivers' directories. To prepare such a setup, do something along these lines:

mkdir ~/yarp_openni2_root
cd ~/yarp_openni2_root
cp -R $OPENNI2_REDIST/OpenNI2 .
cp -R $NITE2_REDIST64/NiTE2 .
// or if you have the 32-bit version:
// cp -R $NITE2_REDIST/NiTE2 .

and call the yarpdev command from the yarp_openni2_root directory.

Usage

To print a list of available options (help):

yarpdev --device OpenNI2DeviceServer --verbose

In detail:

--device

--playback filename.oni

   Playbacks the specified oni file.

--loop

   Forces the playback to loop. If not used, the playback will stop after one run.

--record filename.oni

   records to the specified oni file

--name

   chenge default port prefix (default=/OpenNI2)

--noCameras

   use only user tracker

--noMirror

   disable mirroring

--noUserTracking

--minConfidence x (double)

   set minimum confidence required. Default is 0.6

Doesn't start the user tracker.

Output and data format

The driver opens these ports:

  • [portPrefix]/userSkeleton:o - userSkeleton detection port (only opened if user detection is on)
  • [portPrefix]/depthFrame:o - depth frame port
  • [portPrefix]/imageFrame:o - rgb camera frame port

imageFrame and depthFrame stream YARP images, and if connected to a yarpview, the video is available. userTracker outputs bottles in the following format: tbc

Using the driver from an application

tbc