Difference between revisions of "The Linux on the pc104"
(→iCub LIVE passwords)
(→iCub LIVE passwords)
|Line 117:||Line 117:|
'''NOTE''': the root user has no password, this means that the direct login is
'''NOTE''': the root user has no password, this means that the direct login is , but you can always do
sudo su -
sudo su -
== Startup scripts ==
== Startup scripts ==
Revision as of 16:59, 19 November 2015
These instructions only apply to YARP > 2.3.23 and iCub > 1.1.13 software versions
See The Linux on the pc104 oldrepo for older instructions
- 1 Versioning
- 2 Which version do I need?
- 3 Burn the Debian image
- 4 iCub LIVE passwords
- 5 Startup scripts
- 6 Further Customization
- 7 Detailed information
The pc104 located inside the iCub head runs a full Debian distribution. This version of Linux has been customized for the specific application and to boot from an USB key. As the iCub (project) grows up, many updates have been performed to this Linux usb-key image to follow the hardware as well as the Debian distribution changes. Stable versions are frozen into image files and uploaded to the iCub webserver, for detailed instruction on where to get the image and how to flash it, see following section.
At any time to determine the version of the image is running on your iCub, the following files in the root of the filesystem can be inspected:
- VERSION_PC104: contains the version of the image
- ChangeLog_PC104: list changes to the image
Important: the iCub User password is changed in the iCub LIVE version 5, see below.
- 1.x This is an Etch'n'half based distribution, built on a Debian LIVE system.
- 2.x This is a Lenny based distribution, built on a Debian LIVE system.
- 3.x This is a Squeeze based distribution, contains a kernel with Real-Time patch (rt.wiki.kernel.org).
- 4.x This is a Wheezy based distribution, this version contains an updated version of libportaudio.
- 5.x This is a Wheezy based distribution, built on a Debian LIVE system with overlay persistence, compiled for kernel rt-amd64 (x86 64 bit with real time PREEMPT_RT patches)
Starting from version 5.0, the image file name is composed by four parts: a a major release, a a minor release, a build release which is a string that contains the build date and a kernel flavor string, which describes the kernel architecture the image is built for. For example
*5 is the major release *0 is the minor release *14.11.12 is the build release (Year.Month.Day) *rt-amd64 is the kernel flavour
Up to version 4.0, the image file name is composed by three parts: a major number related to the Debian distribution, a minor number which tells the internal update version and the build release is a short string related to the network configuration, for example the file image1.6-oc.img, the major number is 1, minor is 6 and build is oc. Here, the build release refers to the network configuration the final distribution will boot-up with. We release the following three types of configuration:
* oc: "open call" standard installation (static ip 10.0.0.2, it mounts software from 10.0.0.1). * iit: custom IIT standard installation (static ip 10.0.0.20, it mounts software from 10.0.0.11), to be used inside IIT labs. * dhcp: dhcp-enabled network configuration. If you want to connect the robot on your own network you should be able to use this image. The pc104 will use dhcp. (click here to see how configure a dhcp server: live-with-dhcp).
NEW We wish to make the user experience with the iCub easier so with this release of the pc104 image two main changes has been done in this direction:
- In version 4.0 The image comes in only 2 versions, static and dhcp, while from version 5.0 ht image is only with static IP address.
- Starting from the 4.0 version, the pc104 will mount the very same folder as the server/laptop does, but use a different build folder to have separeted binary code.
The folder is the one called /exports/code in the server, so you'll see
This way by updating the repository, both the server and the pc104 will benefit of the new code. (They still need to be compiled one by one)
The /exports/code-pc104 is no longer used.
Which version do I need?
This question is quite common whenever the number of versions and revisions start to become... more than one.
The Debian image to use depends on the iCub version:
- iCub up to version 1.1 must use a Etch and a Half distribution (image version 1.x). Persistent filesystem allows deep system configuration; if you are happy with current configuration you can skip this update, while if you really need to change system configuration now you can by appling this update.
- iCub from version 1.2 on can use the latest version: we kindly recommend you to keep Debian system updated to the last version (at the time of writing it means the 5.0 @ November 2014)
For persistent filesystem this configuration can be changed without re-burning a new image, you can just edit the configuration files of the network as you would normally do with Linux system.
Burn the Debian image
NOTE : Instructions for burning images version < 5.0 are now grouped here.
From version 5.0 on, the image is based on a Debian LIVE system, which comes into a standard ISO Hybrid image file.
Where to download the ISO image and burn script
ISO images and the script can be downloaded here
Some images are compressed, if so uncompress it before proceeding.
To verify the file has been successfully downloaded, the md5 code can be verified by placing the .md5 file in the same folder as the uncompressed image and typing the following command:
md5sum --check MD5FILE.md5
What is file persitence and how to use it
File persistence is used to write the changes you made to the live filesystem (e. if you modify a file or write a new one) to a separate partition on the USB memory, allowing those changes to survive a reboot. The bigger is the USB memory, the more space you have for the new files, so we suggest at least a 4 Gb USB memory. If you mount an USB memory which persistence enable on a normal PC, you will see two partitions:
- LIVE partition, which contains the live image files
- PERSITENCE partition, which contains all the modified or new files
If you want to enable persistence, you must use the icub_iso2usb.sh script (NOTE : this script has been tested only on Debian GNU/LInux 7 [wheezy] and Ubuntu Ubuntu 14.04.3 LTS [Trusty].)
How to use the icub_iso2usb.sh script
This script takes a iCub PC104 live image and write it to an USB memory, optionally enbling file persistence. The script run on a Linux system and requires the following commands to be installed
On a Debian 7 system, this means that you must install the following packages
parted syslinux syslinux-common syslinux-utils dosfstools e2fsprogs p7zip mbr
The script usage is the following
icub_iso2usb.sh -f LIVE_ISO_FILE -t USB_TARGET_DEVICE [-p PERSISTENCE_SIZE]
- LIVE_ISO_FILE is the live filename (mandatory parameter)
- USB_TARGET_DEVICE is the device to write to the iso image - important: USE a device not a partition (mandatory parameter)
- PERSISTENCE_SIZE is the size of overlay partition (in MB) - set to 0 to disable overlay, the default persistence size is 1024 MB
icub_iso2usb.sh -f icub-live_4.0-14.11.12-rt-amd64.iso -t sdc
There is also an inline help for the script, available with
The image requires an amount of space which is bigger than the the ISO size of a 10%, so setup the persistence partition size accordingly. The script checks if the target USB memory has enough space for live system and persistence (if not disabled), so don't worry.
..and if I don't want to use file persistence?
You can simply write the live iso image, like a normal Hybrid ISO image, i.e.
dd if=<file> of=<device> bs=4M; sync
- <file> is the iso file image name;
- <device> is the linux device that corresponds to the USB memory, like /dev/sdb, /dev/sdc ;
- bs=4M tells dd to manage block with size of 4 Megabytes to speed up the process;
- sync forces all the write operations to be completed before the USB merory is unplugged
iCub LIVE passwords
Starting from version 5.0, the default user is
username : icub password : live
If you want to change the default password simply execute (this works only if you are using persistence)
NOTE: the root user has no password, this means that the direct login (i.e. ssh email@example.com) is disabled, but you can always do
sudo su -
once connected as icub, to switch to the root user.
Important: these instructions apply to the recent persistent images of the Linux (starting from 1.7 and 3.0).
There are some scripts that customize the Linux when the pc104 boots up; those scripts are inside /etc/rciCub.d folder.
- Set RobotName variable
edit the file:
replace the line:
with the name of your robot e.g. iCubGenova01
- Setup password-less login (PC104 & laptop):
See page ICub laptop installation for details.
Important: When upgrading the usb key to a different version, remember to clean the CMakeCache before compiling!! This is because some path are likely to be changed in the meanwhile.
The persistent version of the Debian distribution is now writable so any customization can be done. Please be aware of what you do, because any changes in configuration file can lead to malfunction.
If you want to get detailed information about the iCub LIVE image (i.e. the differences from a standard Debian LIVE) please read this page